Setting the Brightness [80] Contrast [50] & Fade [30] seems to work about right for our drawings...
RIGHT-CLICK...!
RIGHT-CLICK...!
The Right-Click functionality in Civil 3D contains a heap of useful commands depending which object is selected
- Export to Drawings (Rather than Exploding Sections & Profiles)
- Use LaneSuperElevationAOR instead of BLT
- [Ctrl]+Select then [Delete] to Hide Text
- Draw from the Upstream End Down in Pipe Networks (Otherwise Use Slope)
- [Ctrl]+[Tab] to Switch Windows
- Make sure Services are Created on Another Network...
- Can Lock a Surface
- Use Snaphot of a Surface
- Can Adjust Parameters of Single or Multiple Section Views
- QSelect Demonstration (A Pill)
- Express Tools - Replace Block Command (Swap Gabions etc.)
- Design Gabions in 3D Mode...
- Freeze Layer(s) in ALL Viewports Except Current (L Oakes & J Moule)
- Level Difference - Volume Surfaces & Legends
- Need to use (No Display) style on Alignments, otherwise Chainages Freeze too.
- Use of Marked Point and Link to Marked Point to Join Subassemblies... (BW is guru!)
- If Label rotation is incorrect, set to View...
- Turn Viewport off in Viewport Properties = Significant performance gains...
- [Ctrl] + Right Click to select Midpoint between 2 Points...
- Setout using Point within Block & Measure Command (JM)
- TEXTTOFRONT, HATCHTOBACK, MVSETUP (For Rotating Viewports)
- When Pipe Network Profile Chainages are Missing (1 Length of Pipe only) Need to change to Pipe Data Chainage Style instead of Horizontal Geometry Chainage Style
- Exchange Apps Grade Feature Line, Label Assembly
- Level of Detail setting for Contour Display
- Batch rename Layers to EX_* (Use 'Rename' command, Purge, Select all layers required and enter EX_* then OK)
- Export to Drawings (Rather than Exploding Sections & Profiles)
- Use LaneSuperElevationAOR instead of BLT
- [Ctrl]+Select then [Delete] to Hide Text
- Draw from the Upstream End Down in Pipe Networks (Otherwise Use Slope)
- [Ctrl]+[Tab] to Switch Windows
- Make sure Services are Created on Another Network...
- Can Lock a Surface
- Use Snaphot of a Surface
- Can Adjust Parameters of Single or Multiple Section Views
- QSelect Demonstration (A Pill)
- Express Tools - Replace Block Command (Swap Gabions etc.)
- Design Gabions in 3D Mode...
- Freeze Layer(s) in ALL Viewports Except Current (L Oakes & J Moule)
- Level Difference - Volume Surfaces & Legends
- Need to use (No Display) style on Alignments, otherwise Chainages Freeze too.
- Use of Marked Point and Link to Marked Point to Join Subassemblies... (BW is guru!)
- If Label rotation is incorrect, set to View...
- Turn Viewport off in Viewport Properties = Significant performance gains...
- [Ctrl] + Right Click to select Midpoint between 2 Points...
- Setout using Point within Block & Measure Command (JM)
- TEXTTOFRONT, HATCHTOBACK, MVSETUP (For Rotating Viewports)
- When Pipe Network Profile Chainages are Missing (1 Length of Pipe only) Need to change to Pipe Data Chainage Style instead of Horizontal Geometry Chainage Style
- Exchange Apps Grade Feature Line, Label Assembly
- Level of Detail setting for Contour Display
- Batch rename Layers to EX_* (Use 'Rename' command, Purge, Select all layers required and enter EX_* then OK)
No comments:
Post a Comment